Kathrein UFS 903 si, Руководство по эксплуатации

Страница: 17 / 124

17
Connection and setup
Connect the satellite receiver (HDMI or alternatively TV Scart socket) and the TV set using an HDMI or
Scart cable (see “Connection example”). If your TV is stereo, you can receive the sound in stereo via
the HDMI or Scart connection.
For system reasons, the same video signals are present at both the TV Scart socket and also the video
cinch output.
Use a Scart cable to connect the satellite receiver (TV Scart socket) to the video recorder/PVR.
If you want to play the sound on your hi-fi system, connect the audio cinch sockets to the input sockets
on the hi-fi system, using an appropriate cable (see “Connection example”).
The fi bre-optic output is intended for the connection of a Dolby Digital system (see “Connection example”).
Remove the cover on the rear of the remote control. Insert the two batteries supplied into the remote
control. Ensure correct polarity of the batteries; the + and – markings as indicated inside the battery
compartment. Slide the cover back onto the housing until it locks in place.
Connecting a video recorder/PVR to the TV Scart socket allows you only
to record. It does not allow you to play back on the TV set via the receiver.
If you are recording via an external video recorder/PVR, remember not to
operate the receiver during recording, otherwise all the on-screen displays will
appear on your recording.