Kärcher WATERCLEAN 1600 Скачать руководство пользователя страница 24

Страница: 24 / 110

DESCRIPTION

Version 03/2008

WATERCLEAN 1600

- 18 -

2.3.2

Submergible Raw Water Pump

The raw water pump (7/1) is designed as a submergible pump with an
integrated debris filter (7/6). It pumps the raw water from the source
to the water connection panel on the system.

Fig. 7

Raw water pump

The pump comprises:

• a float (7/5), that prevents the pump from sinking to the ground

and sucking in any mud

• a safety cord (7/2) for fixation to the shore

• a 20 m long connection cable (7/4) for the power supply

• a coupling (7/3) for connecting the raw-water hose

As an accessory a pump is provided for blowing up the float.

2.3.3

Raw Water Pump (Option)

If a raw water tank is available, which has a higher water level than the
level of the pump (pump needs NPSH with bled suction hose), the raw
water pump can be used.

Содержание WATERCLEAN 1600















































































































Результаты поиска

Содержание WATERCLEAN 1600

Отзывы:

Похожие инструкции для WATERCLEAN 1600

Бренды по названию

Популярные бренды

Kärcher WATERCLEAN 1600, Руководство по эксплуатации

Результаты поиска

Содержание WATERCLEAN 1600

Отзывы:

Похожие инструкции для WATERCLEAN 1600

Бренды по названию

Популярные бренды