Kärcher WATERCLEAN 1600, Руководство по эксплуатации

Страница: 51 / 110

WATERCLEAN 1600
Version 03/2008
OPERATION
- 45 -
3.2.4 A/C / Heating System
At low temperatures, ensure that the A/C / heating system is set to
"HEAT" and switched on. The requested temperature is to be pre-se-
lected via the temperature regulator of the A/C / heating system. When
the plant is in operation, the water-carrying modules must be kept
frost-free.
WARNING When there is danger of freezing: The power sup-
ply must be ensured at all times. The A/C / heating
system must be switched on and set to "HEAT"; the
temperature must be pre-selected. This also
applies when the plant is not running, for as long
as the frost-protection measures have not been
carried through.
NOTE Before the A/C / heating system is disconnected
from the power supply, it should be switched off.
This must be done latest before re-establishing the
power supply. If this is not done, operation of the
A/C / heating system -also when in switched-on
condition- will not begin, and the error must be
cleared with the "Reset button" on top of the unit
(see Operating Instructions of the A/C / Heating
System). For this, the A/C / heating system must
carefully be pulled out of its storage compartment.
Fig. 30
1 Reset switch
2 A/C / heating
system
3 Thermostat
2 3
1