CAN RANGER III INSTALLATION
22
set up the RPM actuator, the
RPM+ and RPM- buttons move
the RPM actuator out and in,
by a certain step. The step
size is small when the SPEED
switch is in the SLOW
position. The step size is
larger when the SPEED switch
is in the FAST position. If not
using the transmitter to
calibrate the RPM Actuator,
just physically move the
actuator into the Idle and Max
RPM positions when
instructed.
Use the
←
arrow button to
return to Calibration Menu or
<MENU> button to return to
the Main Menu.
Note: If you return to the
same RPM type that is
currently saved, the
parameters will be as they are
currently set. If you change
from one type of RPM to
another, the parameters will
revert to the default settings.
OPTION SETUP
Using the buttons on the CAN
Ranger Receiver, navigate
through the LCD screens to
CALIBRATION. Press <SET>.
Use the arrow buttons to
enter the password 1262.
Then press the
↓
arrow
button three times and press
<SET> to get to the OPTION
SETUP screen:
Option Menu First Screen
