CAN RANGER III INSTALLATION
18
The next screen will be to set
the Engine Stop Position as
described above for Reverse.
Hold the ACTUATOR 1 Handle
in this position, and push
<SET>.
Engine Stop Reverse Calibration
Screen
The next screen lets you
Enable or Disable the Auto
Center feature for ACTUATOR
1. Push
↑
and
↓
arrow
buttons
to toggle between
ENABLE and DISABLE.
Auto Center Calibration Screen
The final step in calibrating
the ACTUATOR 1 function is to
save the settings or if you
don’t want to save them, just
escape. Push <SET> to save
settings or press <ESC> to
quit and the settings will
revert back to the previous
settings.
If you push <SET> the
controller will automatically
return to the Actuator Setup
Main Screen so you can select
the next actuator.
Repeat this procedure for all
the enabled actuators. If this
is the only actuator that
requires calibration or to exit
calibration keep pressing the
←
arrow button
.
The Actuator
calibration is now complete.