58
Kaspersky Anti-Virus
®
for Lotus Notes/Domino
8.1.
Working with objects stored in
the check-up database.
Bases/In queue
During scanning, the Monitor module places all objects in the check-up
database. After the scan is complete, depending on the settings (see Chapter 1
on page 30) the checked objects are sent to the recipient, stored in the
quarantine database, or deleted. Since, during the operation of the Monitor
module the check-up database acts as its queue, the administrator is not advised
to work with this database. However, situations are possible when the
administrator needs to view the check-up database and possibly delete an
infected object from it.
To view the check-up database use the
In queue
hyperlink located in the
Bases
section of the configuration database window (see Figure 9).
A click on this hyperlink will refresh the right frame of the window and display the
list of messages currently stored in the check-up database (see Figure 25).
Figure 25. Mail message check-up database
To view the object in a separate window do the following:
Select the desired element in the list and click on the
Open
hyperlink
adjacent to the element name. This will open the window in the right
frame with a full description of the message including its attributes and the
check-up mark (see Figure 26).
To remove an object from the list, do the following:
Select the desired element in the list and click on the
Delete
hyperlink
adjacent to the element name.