Kampmann Venkon EC, Руководство по установке

Страница: 9 / 84

9 Venkon EC 115 V 9
Safety
Intended Use
2 Safety
This section provides an overview of all important safety
aspects to ensure optimum protection of personnel as well
as safe and trouble-free operation . Additional order-related
safety information is contained in the sections covering the
individual phases of the product‘s life .
2.1 Intended Use
Intended use of the unit also includes adherence to these
instructions .
Any use beyond or other than the stated intended use is
considered misuse .
Check the application with the manufacturer in case of any
doubt .
Information regarding EN60335-1
 This equipment can be used by children from the age of
eight 8 years and by persons with reduced limited, sensory
or mental capabilities or a lack of experience and/or
knowledge, if they are supervised or have been instructed
in the safe use of the device and understood the resulting
dangers . Do now allow children to play with the equipment .
Do not allow children to clean or maintain the equipment
without supervision .
 The equipment is not designed for operation about
2 .000 m .a .s .l .

The equipment is not designed for permanent connection to
the mains water network .

There needs to be a suitable overpressure protection
mechanism fitted to the water network to which the
equipment is connected .

Version 1 (Venkon):
Make sure that the basic unit cannot be accessed by the
general public . Make sure that the basic unit can only be
operated with a casing that prevents the general public
having access to the equipment .

Version 2 (Katherm):
Make sure that the equipment cannot be accessed by the
general public . Make sure that the equipment can only
be operated with a grille that prevents the general public
having access to the equipment .

Max . operating pressure 10 bar [1000 kPa]
 Min . operating pressure 1 bar [100 kPa]
The fan coil is only intended to be used for heating, cooling
and filtering air in frost-free and dry rooms. Within the room,
the unit needs to be connected to the building‘s heating/
cooling/ventilation system and to the building‘s sewage,
water and power network .