Kampmann Venkon EC, Руководство по установке, Страница: 72 / 84

Venkon EC 115 V 72 72
Maintenance
Cleaning
8.3.3 Cleaning Work on the Basic Unit
1
2
3
4
The following components fitted to the basic unit must be
cleaned:
1
Main condensate tray
2
Heat exchanger
3
Valve condensate tray
4
Condensate pump
The casing has to be removed to access the individual
components to clean the above .
1 . Remove side panels (see Chapter 8.3.2. „Visual
Inspections“) .
2 . Remove outlet grille; use a Phillips screwdriver to unscrew
the tapping screws on the left and right in the middle of
the outlet grille and remove the outlet grille .
3 . Remove air intake grille (see Chapter 8.3.1. „Replacing
Filter“ ) .
4 . Unscrew all the relevant screws (Fig. 61) . After these
screws have been loosened, the front panel is still
connected to the window sill by two gusset plates
(Fig. 62) . Manually remove these metal joining plates
upwards .
Important note: On the ceiling model, a rear panel is
located on the underside of the casing, which does not
have to be touched when removing the casing sections . .
The components to be cleaned are now freely accessible .
Fig. 60: Components to be cleaned
Fig. 61: Dismantling the casing
Fig. 62: Front panel connected to
window sill
3
1
2
4
1
These instructions relate to all casing
configurations. Once you have cleaned the various
components, fit the casing panels in the reverse
order to the above instructions.