KAESER KOMPRESSOREN EPC-2-G Series, Сборка и руководство по эксплуатации, Страница: 52 / 96

➤ Only a competent technician may carry out initial start-up.
Special measures for start-up after storage
Storage period
longer than
Action
12 months ➤ Change the Compressor Oil
➤ Have the motor bearings checked by an authorized KAESER Service Tech‐
nician.
36 months ➤ Have the overall technical condition checked by an authorized KAESER
Service Technician.
Tab. 32 Re-commissioning after storage
7.3 Checking installation and operating conditions
➤ Check and confirm all the items in the checklist before first start-up of the machine.
To be checked See
chapter
Complied?
➤ Are the operators fully conversant with safety regulations? –
➤ Have all the positioning conditions been complied with? 5
➤ Is a user-supplied lockable power supply disconnection device instal‐
led?
6.6
➤ Does the power supply conform to the specifications on the nameplate? 2.1
➤ Are the power supply cable conductor diameters and fuse ratings ad‐
equate?
2.11
➤ Have all electrical connections been checked for tightness?
➤ (Repeat check after 50 operating hours) –
➤ Are the user's shut-off and check valves fitted to the compressed air
outlet?
6.4
➤ Is the connection to the air main made with a flexible hose? 6.4
➤ Sufficient oil in the crankcase?
(oil in the sight gauge red zone)
➤ The oil must be changed after 50 operating hours
10.8
➤ Is the user's motor protection device adjusted correctly with regard to
the engine power?
7.4
➤ Oil level monitor connected? 6.7.1
➤ Is the machine securely bolted to the floor or at the compressed air
tank?
6.7.2 /
6.7.3
➤ Are all access doors closed and latched and all removable panels in
place and secured?
(sound enclosure)
–
Tab. 33 Checklist of installation conditions
7 Initial Start-up
7.3 Checking installation and operating conditions
42
Assembly and operating manual 2-stage piston compressor
EPC-2-G
No.: 9_5753_04 E