KAESER KOMPRESSOREN EPC-2-G Series, Сборка и руководство по эксплуатации

Страница: 63 / 96

10.3.1 Cleaning the air cooler or fan guard
Do not use sharp objects to clean the air cooler or fan guard. It could cause damage.
Avoid creating clouds of dust.
➤ Dry brush the air cooler or fan guard and safety screen using a vacuum cleaner to suck up the
dirt.
The air cooler or fan guard can't be cleaned thoroughly?
➤ Have stubborn clogging removed by an authorized KAESER Service Technician.
10.4 Air filter maintenance
The air filter insert is made of fibre mesh.
Material Compressed air for blowing out
Solvent cleaner
Spares as required
Precondition The supply disconnecting device is switched off,
the device is locked off,
a check has been made that no voltage is present.
The machine has cooled down.
Fig. 22 Air filter maintenance
1
Air filter
2
Inlet air opening
3
Air filter element
4
Retaining clip
5
Cover
1. Unscrew the air filter.
2. Release the retaining clip and take off the cover.
3. Blow out the cover and the insert with dry compressed air (<5 bar).
4. Clean the housing and sealing faces.
5. Wet the wire mesh insert lightly with oil after cleaning.
If the insert is heavily clogged, clean with a solvent-based fluid or steam blaster.
Observe safety regulations.
Replace the air filter if it has already been cleaned a number of times.
10 Maintenance
10.4 Air filter maintenance
No.: 9_5753_04 E
Assembly and operating manual 2-stage piston compressor
EPC-2-G
53