KAESER KOMPRESSOREN EPC-2-G Series, Сборка и руководство по эксплуатации, Страница: 39 / 96

5 Installation and Operating Conditions
5.1 Safety
➤ Strictly forbid fire, open flame and smoking.
➤ If welding is carried out on or near the machine, take adequate measures to prevent sparks or
heat from igniting oil vapours or parts of the machine.
➤ The machine is not explosion-proof:
Do not operate in areas in which specific requirements with regard to explosion protection are in
force.
For instance, the requirements of ATEX directive94/9/EC "Equipment and Protective Systems
intended for use in Potentially Explosive Atmospheres".
➤ Ensure that required ambient conditions are maintained with regard to:
■ ambient temperature and humidity,
■ clean inlet air with no damaging contaminants,
■ inlet air free of explosive or chemically unstable gases or vapours,
■ inlet air free of acid/alkaline forming substances, particularly ammonia, chlorine or hydrogen
sulphide.
➤ Keep suitable fire extinguishing agents ready for use.
5.2 Installation conditions
5.2.1 Determining location and clearances
The clearances given are recommended and ensure unhindered access to all machine parts.
➤ Please consult KAESER if you cannot comply with these recommendations.
Precondition The floor must be level, firm and capable of bearing the weight of the machine.
5 Installation and Operating Conditions
5.1 Safety
No.: 9_5753_04 E
Assembly and operating manual 2-stage piston compressor
EPC-2-G
29