KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2
KACO blueplanet 5.0 NX1 M2
Page 4
Note
: If the connection is successful, your
communication device is connected to the
customer WLAN network. Now your mobile
terminal must also be connected to the
customer WLAN network.
6.
Via <Settings> on the mobile terminal,
you must now establish a connection with
the customer WLAN network.
Note:
The password is pre-filled if the
connection already exists.
7.
Note the checklist and status. Process
takes up to 5 min.
»
Your communication device and mobile
device are now in the same customer
network. Successful connection is
displayed in a new window.
Fig. 10.
Connecting a mobile device to
the customer WLAN
Fig. 11.
Connection to the customer
WLAN network is established
Note:
<Network Configuration> displays
information on the unit serial number,
software version and system time.
If the system time differs, you can set it
under <Time Zone>.
8. <Confirm> the successful integration of
the communication device into the
customer WLAN network.
Note:
Your communication device is
equipped with a blue LED that indicates
the connection status to the free
"blueplanet Web" portal. If you use this
portal later on, the blue LED will light up
permanently when in use.
Note:
The software version is the firmware
version of the unit. You can find this in the
chapter 5.2 on Page 27 for update to keep
the device at the current functional status.
»
The communication device is registered
in the customer WLAN network.
Fig. 12.
Status on successful connection
Fig. 13.
connection established - blue
LED flashes.