Page 13
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2
3.3
Reset faulty connection
<Communication device> opened.
Note:
Communication device is restarted
via the <Restart communication device>
menu. Values set in the unit are
not
reset.
1. Press the <Confirm> button in the
warning to trigger a restart.
Attention:
With <
Reset communication
device
>, all configurations already made
are reset to the factory settings.
2. Reset the communication device via
<Reset communication device>.
»
Check connection after restart.
Fig. 44.
Note for <restart communication device>
Fig. 45.
Reset / restart of the unit
Fig. 46.
Note for <Reset
communication device>.
3.4
Changing network
<Communication device> opened.
1 Open the <Network Properties> menu.
The currently connected router is then
displayed.
2.
Enter the password and transfer the
setting via the <Confirm> button.
3. Passwort eingeben und Einstellung über
<Bestätigen> – Button übertragen.
Note:
If the router is defective or no longer
accessible and the communication device
cannot establish a connection, as well as
the blue LED light on the communication
device is not lit, you will find the SSID of
the communication device hotspot with
the serial number of the communication
device in your WLAN list. You can connect
to the hotspot of the communication
device by entering the registration code on
the label as a password.
»
Network changed.
Fig. 47.
Select Network Configuration
Fig. 48.
Change the network
