Kaco blueplanet 3.0 NX1 M2 Скачать руководство пользователя страница 29

Страница: 29 / 36

Page 27

KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2

5.2

Update of the Inverter

HINWEIS

Note that the DC current during the update process is over 100 W. Also note that the sequence of the

firmware update for the associated *bin files must be observed. This process takes approx. 10 minutes.

The files must not be renamed.
Before updating the inverter, the firmware of the communication device must be updated.



Firmware update of the communication device successfully carried out.

Select <Firmware Update>.

2. Select the tab <Inverter > and press <Local upgrade> to call up the inverter device

3. In the

firmware path, locate and open the file

masterVxxx-xxxxx-xx.bin

. The upload begins.

6. Open <Local upgrade> for the <Safety> file

7. In the

firmware path, locate and open the file

safetyVxxx-xxxxx-xx.bin

The upload begins.

8. After completing the update, check the uploaded firmware versions against the version in your firmware path.

Repeat the corresponding process if any deviation is found.

» Following successful update, the device is ready for operation.

Fig. 96.

Select firmware update

Fig. 97.

Select firmware update for

inverter

Fig. 98.

Firmware for inverter and

associated safety update

NOTE

When the communication device is plugged in, no communication via RS485 is possible during firmware

update.

Содержание blueplanet 3.0 NX1 M2





































Результаты поиска

Содержание blueplanet 3.0 NX1 M2

Отзывы:

Бренды по названию

Популярные бренды

Kaco blueplanet 3.0 NX1 M2, Руководство пользователя

Результаты поиска

Содержание blueplanet 3.0 NX1 M2

Отзывы:

Бренды по названию

Популярные бренды