Juniper MX10016, Руководство по оборудованию

Страница: 67 / 320

budget from the power management software. To determine whether your system has the standard power
bus or the enhanced power bus, see Table 8 on page 40 .
JNP10K-PWR-AC Power Supply LEDs
An AC power supply, JNP10K-PWR-AC, has four LEDs on its faceplate: INP1, INP2, PWR OK, and FAULT.
These LEDs display information about the status of the power supply. See Figure 29 on page 68 .
Figure 29: LEDs on an , JNP10K-PWR-AC, Power Supply in an MX10016 Router
g050570
1 2 3 4
3
—
1
—
INP2–Source input 2 FAULT
4
—
2
—
INP1–Source input 1 PWR OK
Table 16 on page 68 describes the LEDs on an AC power supply in an MX10016.
Table 16: LEDs on an , JNP10K-PWR-AC, Power Supply in an MX10016
Description State Color LED
Indicates one of the following:
•
AC power input voltage is not within the normal
operating range.
Blinking Yellow INP1 or INP2
•
AC is within operating range (200–240 VAC). On steadily Green
The power supply is switched off. Unlit Dark
68