manualshive.com logo in svg

Juniper JUNOSE 11.2.X BGP AND MPLS, Руководство по настройке

Конфигурационное руководство для Juniper JUNOSE 11.2.X по настройке BGP и MPLS. Получите доступ к бесплатному скачиванию этого руководства на нашем сайте. Подробная информация о настройке и использовании продукта доступна для загрузки на manualshive.com.

Поделиться
Скачать
background image

Table of Contents

About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxiii

E Series and JunosE Documentation and Release Notes . . . . . . . . . . . . . . . . . . xxxiii
Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxiii
E Series and JunosE Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . xxxiii
Obtaining Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxv
Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxv
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxv

Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxvi
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxvi

Part 1

Border Gateway Protocol

Chapter 1

Configuring BGP Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Conventions in This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Autonomous Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
BGP Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
BGP Peers and Neighbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
BGP Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
IBGP and EBGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Interior Gateway Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
BGP Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
BGP Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Routing Information Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Prefixes and CIDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Path Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Transit and Nontransit Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
IPv6 BGP Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Exchange of IPv6 Routing Information over TCP IPv4 . . . . . . . . . . . . . . . 13
Exchange of IPv6 Routing Information over TCP IPv6 . . . . . . . . . . . . . . . 14
Link-Local Next Hops in MP-BGP Packets . . . . . . . . . . . . . . . . . . . . . . . . 14

Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Before You Configure BGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuration Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Enabling BGP Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Understanding BGP Command Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Inheritance of Configuration Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Limitations on Inheritance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

ix

Copyright © 2010, Juniper Networks, Inc.

Содержание JUNOSE 11.2.X BGP AND MPLS







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2.X BGP AND MPLS

Xerox DocuPrint 115 System Manual preview
DocuPrint 115
Бренд: Xerox Страницы: 100
Juniper JUNOS PUS MOBILE SECURITY SUITE Datasheet preview
JUNOS PUS MOBILE SECURITY SUITE
Бренд: Juniper Страницы: 6
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Бренд: Netscape Страницы: 874
Teklynx Discover ActiveX Programmer'S Manual preview
Discover ActiveX
Бренд: Teklynx Страницы: 165
Sawgrass Aficio GX7000 Getting Started Manual preview
Aficio GX7000
Бренд: Sawgrass Страницы: 48
Sonifex D:Scribe User Handbook Manual preview
D:Scribe
Бренд: Sonifex Страницы: 68
Intel SMALL BUSINESS SERVER Manual preview
SMALL BUSINESS SERVER
Бренд: Intel Страницы: 79
3Com SUPERSTACK 3 WEBCACHE 3000 User Manual preview
SUPERSTACK 3 WEBCACHE 3000
Бренд: 3Com Страницы: 362
FieldServer FS-8704-13 Driver Manual preview
FS-8704-13
Бренд: FieldServer Страницы: 19
Autodesk ALIAS SURFACE Brochure preview
ALIAS SURFACE
Бренд: Autodesk Страницы: 10
Yamaha Loopfactory AN200 Manual preview
Loopfactory AN200
Бренд: Yamaha Страницы: 72
Novell SERVICE DESK - INSTALLATION V6.1 Installation Manual preview
SERVICE DESK - INSTALLATION V6.1
Бренд: Novell Страницы: 18
HP Neoware e370 - Thin Client Quick Start Manual preview
Neoware e370 - Thin Client
Бренд: HP Страницы: 24
HP nld Manual preview
nld
Бренд: HP Страницы: 330
HP NonStop Pathway/iTS Programming Manual preview
NonStop Pathway/iTS
Бренд: HP Страницы: 694
HP Neoware e90 - Thin Client Quick Start Manual preview
Neoware e90 - Thin Client
Бренд: HP Страницы: 24
UNIBLUE SYSTEMTWEAKER 2010 - V1 Product Manual preview
SYSTEMTWEAKER 2010 - V1
Бренд: UNIBLUE Страницы: 13
APPLIED ACOUSTICS SYSTEMS Strum Acoustic GS-1 User Manual preview
Strum Acoustic GS-1
Бренд: APPLIED ACOUSTICS SYSTEMS Страницы: 91

Бренды по названию

Популярные бренды

Загрузить еще бренды