manualshive.com logo in svg

Juniper JUNOSE 11.2.X BGP AND MPLS, Руководство по настройке

Конфигурационное руководство для Juniper JUNOSE 11.2.X по настройке BGP и MPLS. Получите доступ к бесплатному скачиванию этого руководства на нашем сайте. Подробная информация о настройке и использовании продукта доступна для загрузки на manualshive.com.

Поделиться
Скачать
background image

providing Internet access..........................................461
pruning failed ECMP paths......................................384
reachability of next hops..........................................454
route distinguisher......................................................389
route processing by BGP..........................................459
route reachability information.................................413
route target

configuring VPN topologies...........................409
defining...................................................................425

route-target extended community........................413
route-target filtering....................................................413
route-target filtering, disabling...............................437
route-target membership attribute.......................413
routing loops, preventing..........................................447
RT-MEM-NLRI attribute.............................................413
RT-MEM-NLRI routing updates..............................413
secondary routing table lookup.............................435
setting maximum route limits................................452
sham link, OSPF...........................................................479
site-of-origin to prevent routing loops................447
static routes to shared IP interface.......................467
static routes, advertising..........................................445
traffic flow from Internet to VPN...........................467
traffic flow from VPN to Internet...........................461
transporting packets..................................................394
unlabeled unicast routes, processing.................460
update message enhancement............................390
VPLS.................................................................................579
VPLS, configuring........................................................596
VPN services, configuring..........................................421
VPN topologies, configuring with route

targets........................................................................409

full-mesh..............................................................409
hub-and-spoke....................................................410
overlapping.............................................................411

VPN-IPv4 address......................................................389
VPNs between ASs

IPv4...........................................................................401
IPv6.........................................................................408

VPNs within an AS

IPv4..........................................................................394
IPv6..........................................................................399

VRF...................................................................................388

Bidirectional Forwarding Detection.

See

BFD

Border Gateway Protocol.

See

BGP

bridge commands

bridge acquire...............................................................593
bridge address..............................................................593
bridge aging-time........................................................593

bridge learn....................................................................593
bridge snmp-trap link-status.................................593
bridge vpls rd..................................................................591
bridge vpls route-target.............................................591
bridge vpls site-name site-id.................................590
bridge vpls site-range................................................590
bridge vpls transport-virtual-router..........590, 603
bridge-group.................................................................594

bridging, transparent

and VPLS........................................................................576

bundle messages, MPLS...................................................240
bypass tunnels, MPLS RSVP-TE....................................295

C

candidate ports.....................................................................542
capabilities, BGP

Cisco-proprietary route refresh...............................123
cooperative route filtering.........................................123
deprecated dynamic capability

negotiation..................................................................123

dynamic capability negotiation...............................123
four-octet AS numbers...............................................123
graceful restart..............................................................123
multiprotocol extensions...........................................123
route refresh....................................................................123

capability codes.....................................................................123
capability negotiation, BGP...............................................123
carrier-of-carriers IPv4 VPNs..........................................469

enabling...........................................................................473

carrier-of-carriers IPv6 VPNs...........................................475
CE (customer edge device)....................................386, 574
CE-side load balancing......................................................539
cell aggregation

See

concatenation

cell relay encapsulation

for a single VC and multiple VCs

pseudowire type used......................................560

cell relay encapsulation, VCC.

See

VCC cell relay

encapsulation

check-vpn-next-hops command..................................458
CIDR (Classless Interdomain Routing)

configuring addresses.....................................................9

cleanout-timeout-factor command....................279, 281
clear

BGP hard...........................................................................96
BGP soft............................................................................96

clear bgp ipv6 commands

clear bgp ipv6..................................................................96
clear bgp ipv6 dampening.........................................99

687

Copyright © 2010, Juniper Networks, Inc.

Index

Содержание JUNOSE 11.2.X BGP AND MPLS







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2.X BGP AND MPLS

MACROMEDIA FLEX-CREATING ADVANCED COMPONENTS Manual preview
FLEX-CREATING ADVANCED COMPONENTS
Бренд: MACROMEDIA Страницы: 24
AMD AMD-8151 HyperTransport AGP3.0 Revision preview
AMD-8151 HyperTransport AGP3.0
Бренд: AMD Страницы: 16
Spectrel Reserver Installation And Administration Manual preview
Reserver
Бренд: Spectrel Страницы: 74
Internet Security Systems RealSecure User Manual preview
RealSecure
Бренд: Internet Security Systems Страницы: 126
TC Works ASSIMILATOR User Manual preview
ASSIMILATOR
Бренд: TC Works Страницы: 20
Symantec BACKUP EXEC 11D Quick Installation Manual preview
BACKUP EXEC 11D
Бренд: Symantec Страницы: 18
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S Release Note preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S
Бренд: Symantec Страницы: 14
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1
Бренд: Symantec Страницы: 90
Lowrance MapCreate 6 Install And Operation Instructions preview
MapCreate 6
Бренд: Lowrance Страницы: 76
Mad Catz SharkPort PS2 Owner'S Manual preview
SharkPort PS2
Бренд: Mad Catz Страницы: 16
LEI Extras MapCreate Canada 6.3 Addendum preview
MapCreate Canada 6.3
Бренд: LEI Extras Страницы: 1
Sun Microsystems VIRTUALBOX 3.0.0 User Manual preview
VIRTUALBOX 3.0.0
Бренд: Sun Microsystems Страницы: 259
FieldServer FS-8700-41 Driver Manual preview
FS-8700-41
Бренд: FieldServer Страницы: 48
MACROMEDIA BREEZE-USING THE BREEZE XML WEB SERVICES Use Manual preview
BREEZE-USING THE BREEZE XML WEB SERVICES
Бренд: MACROMEDIA Страницы: 196
KAPERSKY ANTI-VIRUS 6.0 User Manual preview
ANTI-VIRUS 6.0
Бренд: KAPERSKY Страницы: 298
TC Electronic Loudness Radar Meter LM5 Product Manual preview
Loudness Radar Meter LM5
Бренд: TC Electronic Страницы: 12
Canon PowerShot A620 - 7.1MP Digital Camera Software Starter Manual preview
PowerShot A620 - 7.1MP Digital Camera
Бренд: Canon Страницы: 106
Tech Source RAPTOR DL-LITE - X11R6.1 FOR AIX INSTALLATION-REFERENCE Installation And Reference Manual preview
RAPTOR DL-LITE - X11R6.1 FOR AIX INSTALLATION-REFERENCE
Бренд: Tech Source Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды