Juniper JUNOSE 11.2.X BGP AND MPLS, Руководство по настройке

Страница: 115 / 742

•
external —Reverts to the normal BGP rules for propagating the MED; this is the BGP
default
•
internal —Sets the MED of a received route that is being propagated to an external
peer equal to the IGP cost of the indirect next hop
•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set metric-type internal
•
Use the no version to delete the set clause from a route map.
•
See set metric-type.
set origin
•
Use to set the BGP origin of the advertised route.
•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set origin egp
•
Use the no version to delete the set clause from a route map.
•
See set origin.
set tag
•
Use to set the tag value of the destination routing protocol.
•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set tag 23
•
Use the no version to delete the set clause from a route map.
•
See set tag.
set weight
•
Use to specify the BGP weight for the routing table.
•
The weights assigned with the set weight command in a route map override the weights
assigned using the neighbor weight and neighbor filter-list weight commands.
•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set weight 200
•
Use the no version to delete the set clause from a route map.
•
See set weight.
79 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring BGP Routing