manualshive.com logo in svg

Juniper JUNOSE 11.2.X BGP AND MPLS, Руководство по настройке

Конфигурационное руководство для Juniper JUNOSE 11.2.X по настройке BGP и MPLS. Получите доступ к бесплатному скачиванию этого руководства на нашем сайте. Подробная информация о настройке и использовании продукта доступна для загрузки на manualshive.com.

Поделиться
Скачать
background image

bgp always-compare-med........................................119
bgp bestpath med confed.........................................122
bgp client-to-client reflection.................................148
bgp cluster-id.................................................................149
bgp confederation identifier.....................................143
bgp confederation peers..................................143, 144
bgp dampening..............................................................99
bgp default ipv4-unicast.............................................43
bgp default local-preference....................................113
bgp default route-target filter.................................437
bgp enforce-first-as.......................................................61
bgp fast-external-fallover..........................................34
bgp log-neighbor-changes........................................30
bgp redistribute-internal.............................................54
bgp shutdown.................................................................34
bgp wait-on-end-of-rib.............................................413

See also

show bgp ipv6 commands

bgp graceful-restart commands

bgp graceful-restart.....................................................123
bgp graceful-restart restart-time...........................123
bgp graceful-restart stalepaths-time...................123
bgp

graceful-restartpath-selection-defer-time-limit.123

BGP-based VPLS

See

VPLS (virtual private LAN

service)

BGP/MPLS VPNs

address family, disabling default..........................446
advertisement rules with route-target

filtering.........................................................................413

applications...................................................................383
AS number

advertising prefixes with duplicate...............451
using for all CE sites...........................................447

BGP advertising rules for routes...........................460
BGP sessions, configuring........................................445
customer edge device...............................................386
data transport..............................................................394
default route to shared interface..........................462
ECMP.....................................................................384,  439
ECMP indirect next hops..........................................384
export list.......................................................................389
export map, setting the............................................428
extended community, route target.......................389
fallback global..............................................................435
fallback global example.................................463, 465
fast reconvergence.....................................................454
filtering routes................................................................413
full mesh VPN...............................................................425

global export map

example.................................................................468
IPv6 VPN routes..................................................433
setting the.............................................................428

global import map to import specific

routes..........................................................................464

hub-and-spoke VPN..................................................426
IGP routes, advertising..............................................446
IGPs, configuring on VRF...........................................437
import list.......................................................................389
import map, setting the............................................428
inter-AS (interprovider) services

IPv4...........................................................................401
IPv6.........................................................................408

interaction with OSPF................................................479
intra-AS services

IPv4..........................................................................394
IPv6..........................................................................399

IPv6 over IPv4...............................................................476
L2VPNs and...................................................................643
L2VPNs, configuring...................................................656
label-switching routers.............................................386
labeled and unlabeled routes, sending...............457
labeled unicast routes, processing......................460
labeled VPN routes, processing............................460
maximum number of external best paths for

route target filtering................................................413

maximum routes.........................................................452
MP-Reach-NLRI attribute........................................390
MP-Unreach-NLRI attribute.....................................391
MPLS labels..................................................................394
next hops, check reachability.................................454
OSPF backdoor link..........................................479, 482
OSPF configuration....................................................483
OSPF domain identifier attribute..........................479
OSPF route type attribute........................................479
OSPF routes

distributing between PEs.................................479
distributing from CE to PE...............................479
distributing from PE to CE...............................479

OSPF routing information, preserving.................479
OSPF routing loops, preventing.............................479
overriding AS number for CE sites.........................447
parent VR, peering with VRF...................................454
path failure, ECMP......................................................384
peering between VRF and parent VR..................454
platform considerations...........................................393
provider core routers..................................................386
provider edge routers.................................................386

Copyright © 2010, Juniper Networks, Inc.

686

JunosE 11.2.x BGP and MPLS Configuration Guide

Содержание JUNOSE 11.2.X BGP AND MPLS







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2.X BGP AND MPLS

Altigen AltiWare OE 4.6 Administration Manual preview
AltiWare OE 4.6
Бренд: Altigen Страницы: 518
Nortel CC MIS User Manual preview
CC MIS
Бренд: Nortel Страницы: 374
MACROMEDIA COLDFUSION 5-DEVELOPING Develop Manual preview
COLDFUSION 5-DEVELOPING
Бренд: MACROMEDIA Страницы: 438
ARRI Ramp Preview Controller Operation Manual preview
Ramp Preview Controller
Бренд: ARRI Страницы: 46
Konica Minolta Crown Print Monitor+ Administrator'S Manual preview
Crown Print Monitor+
Бренд: Konica Minolta Страницы: 28
Sierra Wireless Writing an embedded application loader Application Note preview
Writing an embedded application loader
Бренд: Sierra Wireless Страницы: 9
Sierra Wireless IP Manager Configuration Manual preview
IP Manager
Бренд: Sierra Wireless Страницы: 16
I.R.I.S. IRISPowerscan 9.5 User Manual preview
IRISPowerscan 9.5
Бренд: I.R.I.S. Страницы: 182
GAI-Tronics XAC0140A Installation Instructions preview
XAC0140A
Бренд: GAI-Tronics Страницы: 5
MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION... Using Manual preview
COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION...
Бренд: MACROMEDIA Страницы: 70
IBM NETCOOL 4.3-W User Manual preview
NETCOOL 4.3-W
Бренд: IBM Страницы: 516
MACROMEDIA FLEX-FLEX ACTIONSCRIPT LANGUAGE Reference preview
FLEX-FLEX ACTIONSCRIPT LANGUAGE
Бренд: MACROMEDIA Страницы: 830
GE v6 User Manual preview
v6
Бренд: GE Страницы: 269
Datalogic Falcon Management Utility User Manual preview
Falcon Management Utility
Бренд: Datalogic Страницы: 100
Lenovo ThinkPad R51 Supplementary Manual preview
ThinkPad R51
Бренд: Lenovo Страницы: 104
Lenovo THINKPAD R60 Hardware Maintenance Manual preview
THINKPAD R60
Бренд: Lenovo Страницы: 204
Lenovo THINKPAD R51E Supplementary Manual preview
THINKPAD R51E
Бренд: Lenovo Страницы: 104
Lenovo ThinkPad R500 Hardware Maintenance Manual preview
ThinkPad R500
Бренд: Lenovo Страницы: 190

Бренды по названию

Популярные бренды

Загрузить еще бренды