Juniper JUNOSE 11.2.X BGP AND MPLS, Руководство по настройке

Страница: 225 / 742

Table 39: show ip bgp neighbors received-routes Output Fields
(continued)
Field Description Field Name
Local autonomous system number local AS
Total number of routes stored in the BGP routing table and amount
of memory consumed by routes. If several peers have advertised a
route to the same prefix, all routes are included in this count. routes
Number of routes to unique prefixes stored in the BGP routing table.
If several peers have advertised a route to the same prefix, only the
best route is included in this count. distinct destinations
Number of routes in the BGP routing table that have been inserted
into the IP routing table routes selected for route
table installation
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory. path attribute entries
Prefix for the routing table entry Prefix
IP address of BGP peer Peer
IP address of the next hop Next hop
Multiexit discriminator for the route MED
Local preference for the route LocPrf
Assigned path weight Weight
Origin of the route Origin
Related Topics show bgp ipv6 neighbors received-routes
•
•
show ip bgp neighbors received-routes
Monitoring Routes Originating from a BGP Neighbor After Application of Inbound Policy
Purpose Display all routes that originate from the specified BGP neighbor after inbound policy is
applied. Report whether the indirect next hop of a route is unreachable; if not, display
the IGP cost to the indirect next hop.
The show ip bgp neighbors routes and show bgp ipv6 neighbors routes commands
display similar information.
189 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP