Juniper JUNOSE 11.2.X BGP AND MPLS, Руководство по настройке

Страница: 487 / 742

•
Use the no version to remove the site of origin for routes received from the peer.
•
See neighbor site-of-origin.
Advertising Prefixes with Duplicate AS Numbers
When a BGP speaker receives a route that has the speaker’s AS number in its AS path,
the speaker declares that route to be a loop and discards it. However, in some
circumstances, as in the implementation of a hub-and-spoke VPN topology, this is not
the desired behavior. You want the BGP speaker (hub) to accept such routes. You can
use the
neighbor allowas-in command to specify the number of times that a route’s AS
path can contain the BGP speaker’s AS number.
The behavior is different within the VPNv4 address family than it is in other address
families. For other address families, you must configure the feature on all the peers. In
contrast, IBGP peers within the VPNv4 address family always accept routes containing
their own AS number by default. Issuing this command in the VRF for such a peer has no
effect on the behavior of IBGP peers in this address family. This behavior reduces the
provisioning overhead for VPNv4 IBGP peers.
However, you must configure the feature on the peer router at the hub. Consider the
hub-and-spoke topology shown in Figure 98 on page 451. PE 1, PE 2, and PE 3 are peers
in the VPNv4 address family. Routes received from CE 1 may contain the AS number (777)
local to the PE routers. You must issue the
neighbor allowas-in command for VRF A on
PE 1.
Figure 98: Allowing Local AS in VPNv4 Address Family
neighbor allowas-in
•
Use to enable the acceptance of all routes whose AS path contains the BGP speaker’s
AS number up to the specified number of times.
•
If the AS path of a route contains the speaker’s AS number more than the specified
number of times, the route is determined to be a loop and is discarded.
451 Copyright © 2010, Juniper Networks, Inc.
Chapter 6: Configuring BGP-MPLS Applications