Jungheinrich EJE 116, Руководство по эксплуатации

Страница: 59 / 81

0606
.GB
F 8
6 Instructions for the servicing operations
6.1 Preparing the truck for the performance of servicing and maintenance opera-
tions
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Safely park the truck (see Chapter E).
– Pull out the battery plug (1).
F
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter “Transportation
and commissioning” have to be observed.
When performing work on the parking brake, the truck must be secured against mov-
ing.
6.2 Removing the front cover
– Unscrew two screws (6).
– Carefully remove the front cover (3).
6.3 Removing the drive cover
The drive cover consists of two halves (3/4).
– Turn the control shaft to the right-hand stop position.
– Remove the 2 screws (2).
– Carefully remove the first cover half (3).
– Turn the control shaft to the left-hand stop position.
– Carefully unscrew and remove the second cover half (4).
1
2
3
4
5
6
7
8
9
0
Set
1
2
3
5
6
4
5
0606
.GB
F 8
6 Instructions for the servicing operations
6.1 Preparing the truck for the performance of servicing and maintenance opera-
tions
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Safely park the truck (see Chapter E).
– Pull out the battery plug (1).
F
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter “Transportation
and commissioning” have to be observed.
When performing work on the parking brake, the truck must be secured against mov-
ing.
6.2 Removing the front cover
– Unscrew two screws (6).
– Carefully remove the front cover (3).
6.3 Removing the drive cover
The drive cover consists of two halves (3/4).
– Turn the control shaft to the right-hand stop position.
– Remove the 2 screws (2).
– Carefully remove the first cover half (3).
– Turn the control shaft to the left-hand stop position.
– Carefully unscrew and remove the second cover half (4).
1
2
3
4
5
6
7
8
9
0
Set
1
2
3
5
6
4
5