Jungheinrich EJE 116, Руководство по эксплуатации

Страница: 27 / 81

0606
.GB
D 6
Charging times
The time required for recharging depends on the capacity of the battery.
LED display
Fill-up charge
The fill-up charge begins automatically after the recharge procedure has ended.
Partial recharging
The battery charger is designed in such a way that it automatically adapts to the
charging status of partially recharged batteries. This permits to reduce wear and tear
of the battery.
Green LED
(charging
status)
Red LED
(fault)
Indication
is lit --- Recharge procedure is finished; battery is full.
(charging break,
fill-up charge or equalization charge)
flashes slowly --- Charging process
flashes fast --- Indicates the start of a recharge procedure or that a
new charging curve was adjusted. The number of
the flashing pulses corresponds to the adjusted
charging curve.
--- is lit Excess temperature. Recharge process is interrupt-
ed.
--- flashes slowly Safety charging interval exceeded. Recharge proc-
ess is interrupted. Disconnection from the mains is
required for restarting the charging process.
--- flashes fast charging curve setting is invalid.
--- --- Power failure and/or no battery connected.
0606
.GB
D 6
Charging times
The time required for recharging depends on the capacity of the battery.
LED display
Fill-up charge
The fill-up charge begins automatically after the recharge procedure has ended.
Partial recharging
The battery charger is designed in such a way that it automatically adapts to the
charging status of partially recharged batteries. This permits to reduce wear and tear
of the battery.
Green LED
(charging
status)
Red LED
(fault)
Indication
is lit --- Recharge procedure is finished; battery is full.
(charging break,
fill-up charge or equalization charge)
flashes slowly --- Charging process
flashes fast --- Indicates the start of a recharge procedure or that a
new charging curve was adjusted. The number of
the flashing pulses corresponds to the adjusted
charging curve.
--- is lit Excess temperature. Recharge process is interrupt-
ed.
--- flashes slowly Safety charging interval exceeded. Recharge proc-
ess is interrupted. Disconnection from the mains is
required for restarting the charging process.
--- flashes fast charging curve setting is invalid.
--- --- Power failure and/or no battery connected.