Jungheinrich EJE 116, Руководство по эксплуатации

Страница: 18 / 81

C 1
0606
.GB
C Transportation and commissioning
1 Transportation by crane
M
Only use lifting equipment with sufficient load capacity.
Transportation weight = dead battery weight; see truck identification plate.)
Z
Lifting points (1) are supplied on the chassis for transporting the truck using a crane.
– Safely park the truck (see Chapter E).
– Attach the crane equipment to the lifting
points (1).
M
Attach the crane equipment to the lift-ing
points in such a manner that it absolutely
cannot slip!
Lifting equipment for the crane must be
attached in such a manner that it does not
come into contact with components dur-
ing lifting.
2 Commissioning
M
Only drive the truck under battery power!
A rectified alternating current damages
the electronic components. Cable con-
nections to the battery (towing cable)
must be shorter than 6 m.
In order to make the truck operationally
ready after delivery or after transport, car-
ry out the following:
– Check the state and the completeness of the equipment.
– If necessary, install the battery; do not damage the battery cable.
– Charge the battery (see Chapter D).
– The battery discharge indicator must match the battery type (to be verified by man-
ufacturer service personnel) if the customer uses a maintenance-free battery.
– Put the truck into operation as described (see Chapter E).
Z
After the truck is parked, the surfaces of the wheels may flatten. After a short driving
time, this flattening disappears again.
1
2
3
4
5
6
7 8
9
0
Set
1
C 1
0606
.GB
C Transportation and commissioning
1 Transportation by crane
M
Only use lifting equipment with sufficient load capacity.
Transportation weight = dead battery weight; see truck identification plate.)
Z
Lifting points (1) are supplied on the chassis for transporting the truck using a crane.
– Safely park the truck (see Chapter E).
– Attach the crane equipment to the lifting
points (1).
M
Attach the crane equipment to the lift-ing
points in such a manner that it absolutely
cannot slip!
Lifting equipment for the crane must be
attached in such a manner that it does not
come into contact with components dur-
ing lifting.
2 Commissioning
M
Only drive the truck under battery power!
A rectified alternating current damages
the electronic components. Cable con-
nections to the battery (towing cable)
must be shorter than 6 m.
In order to make the truck operationally
ready after delivery or after transport, car-
ry out the following:
– Check the state and the completeness of the equipment.
– If necessary, install the battery; do not damage the battery cable.
– Charge the battery (see Chapter D).
– The battery discharge indicator must match the battery type (to be verified by man-
ufacturer service personnel) if the customer uses a maintenance-free battery.
– Put the truck into operation as described (see Chapter E).
Z
After the truck is parked, the surfaces of the wheels may flatten. After a short driving
time, this flattening disappears again.
1
2
3
4
5
6
7 8
9
0
Set
1