Jung J630D, Руководство пользователя

Страница: 131 / 316

J630D
5. Functions of the machine 26.7.02 125
5.5.3 Surface grinding
The reciprocating surface grinding function is used to grind the surface of a work-
piece (e.g. on a magnetic work table). The X-axis (grinding table) effects a longi-
tudinal, oscillating motion between adjustable, reciprocating cams. The Z-axis
(grinding table in the cross direction) effects either a continuous or an incremental
oscillating motion between similarly adjustable cams. The infeed motion is control-
led via the Y-axis (vertical axis of the grinding head). It is effected at the cams in
the Z-axis.
Activating surface grinding
• Set the key switch to the automatic position (see section 3.2 “Machine control
unit” on page 51, position 33).
• Press the "change module" key (see section 3.1 “Control unit” on page 47,
position 12).
• Press the "Program Jung" softkey.
• Press the "Grinding program" softkey.
• Press the "Surface grinding" softkey.
– You can now enter the geometry data on the "Surfaces unif. spacing"
screen.
You can change to the geometry area for "Surface irregular spacing" by pres-
sing the "Irregular spacing" softkey.