Jung J630D, Руководство пользователя

Страница: 70 / 316

J630D
64 26.7.02 4. Functional description of the operating modes
– You can infeed in increments in the plus (clockwise) or minus (anti-clockwi-
se) direction.
4.3.1.8 Setting the reversing positions for the reciprocating motion in the X-
axis directly
• Press the "Recip. Value X-Axis" softkey.
You can enter the current position values for the reciprocating X-axis in the input
boxes directly by pressing the "Teach Pos. +", "Teach Pos. -" and "Teach Stop-
pos." softkeys.
Alternatively, you can set the values for the reciprocating X-axis using the scroll-
bars.
• Set the right-hand reversing position (X+) with the top slider control.
• Set the left-hand reversing position (X-) with the middle slider control.
• Set the X-stop position with the bottom slider control.
• You can advance directly to the next option by pressing the arrow right key
(See section 3.1 “Control unit” on page 47, position D14). This input procedure
is described below under "Alternatives".
Alternatives:
• You can enter settings with 1.18 inch + or - increments using the scroll keys
(See section 3.1 “Control unit” on page 47, position D9, D19).