Jung J630D, Руководство пользователя

Страница: 232 / 316

J630D
226 26.7.02 7. Accessories
Filter elements
1
st
filter stage:
– Washable, 20-ply, wire-mesh filter with expanded-metal backing fabric.
2
nd
filter stage:
– Synthetic microfilter mat to DIN 53 438, class EU 5, in aluminium frame.
3
rd
filter stage:
– Compact filter cell to DIN 24 184, filter class -S-, separation efficiency
99.99 %.
– Pleated filter medium cast in a stable frame. This filter element is specially
designed for separating liquid aerosols, e.g. aqueous emulsions, oil mist
and vapours.
Safety precautions
Starting and stopping the extractor manually
• To switch on the extractor, press the "Extraction device ON/OFF" key (see sec-
tion 3.2 “Machine control unit” on page 51, position 17).
• To switch off the extractor, press the "Extraction device ON/OFF" key again
(see section 3.2 “Machine control unit” on page 51, position 17).
Starting and stopping the extractor automatically during a program cycle
The extractor is switched ON and OFF automatically during a program cycle.
Never open the unit when it is switched on or operating.
Before cleaning or carrying out any maintenance work, make sure
that the unit is switched off and take steps to prevent it from being
switched on again accidentally.
If vapours, gases, dusts, aerosols or oil mist occur in such large
quantities that they represent a health hazard, the owner is under an
obligation to ensure that they are extracted.
Never operate the grinding mist extractor without a filter or with a fil-
ter that is defective.
Do not extract any substances that could have a corrosive effect on
aluminium or other metals, plastics or paints.
Do not extract any highly inflammable or explosive substances
(flash point < 120°C).
Please refer to the EU Material Safety Sheet provided by your
coolant supplier for the flash point of your particular coolant.