Jung J630D, Руководство пользователя

Страница: 57 / 316

J630D
3. Machine control unit / remot control panel 26.7.02 51
3.2 Machine control unit
Keys
Electrical
destination
Function
1 1-S30 Adjusts the programmed cutting speed in steps
2
1-S2 Grinding spindle motor OFF
3
1-S1 Grinding spindle motor ON (for optional cutting speeds
greater than 35 m/s you must first reset the key-operated
switch to the position for high cutting speeds and then
press this key twice)
4 8-S1 Adjusts the magnetic gripping force in steps
5
8-S3 Magnetic gripping force OFF
6
8-S2 Magnetic gripping force ON
7 0-S3 EMERGENCY STOP button
8
0-S2 Control unit OFF
9
0-S1 Control unit ON
10
12-S30 Override switch for the sum of the grinding axes Y and Z
during a grinding cycle. The programmed axis speeds
can be reduced by setting a percent value
11
12-S31 Override switch for the X-axis. The programmed axis
speed can be reduced by setting a percent value
12
12-S32 Override switch for the sum of the dressing axes during a
dressing program. The programmed axis speed can be
reduced by setting a percent value
13
3-S10 Adjusts the coolant supply (left to reduce, right to incre-
ase)