Art. No. DS 4092 TS
anticlockwise: upwards
This parameter is only visible on
"Function value adjustment = enabled"!
Step width (1 … 15)
1...
15
This parameter defines the change of
the value during adjustment in a positive
or negative direction.
It is only visible with "Function = value
transmitter 0...255" and "Function =
value transmitter 0...100%" and only
with enabled value adjustment!
Step width (1 … 31)
1...
15
...31
With the value transmitter comfort
0…255 a value adjustment is possible
by small and large step widths
depending on the speed of rotation.
During a fast rotary movement, the size
of the step width is also specified by the
rotation angle. During an operation, the
value in the communication object
"Feedback value" is increased or
decreased by the effective step width
and transmitted again to the bus via the
object "value". The effective step width
for the value adjustment is obtained
from the speed of a rotary knob
operation. During a slow operation
(notch by notch), the rotary knob
constantly transmits values in small step
width to the actuator. During a slow,
continuous operation, the value is
adjusted with each notch by the step
width configured here and transmitted
via the object "value".
This parameter is only visible with
"Value transmitter comfort 0…255"!
Value adjustment with
overflow
yes
no
If, during the value adjustment, the
device detects that the preset step width
will exceed the limits with the next
telegram, the device adapts the step
width once in such a way that the
corresponding limit value is transmitted
together with the last telegram.
Depending on the setting of this
parameter, the device stops the
adjustment at this point or inserts a
pause consisting of two increments and
then continues the adjustment beginning
with the other limit value.
This parameter is only visible on
"Function value adjustment = enabled"!
With the "Value transmitter comfort
0…255" no overflow is ever possible
(setting "no" is fixed).
Page 115 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
