Art. No. DS 4092 TS
Command on rising
edge
Switching object 1.1
No reaction
ON
OFF
TOGGLE
This parameter can be used to define
which object value is transmitted first to
the bus via the first communication
object of the input when there is a rising
edge (TOGGLE - switchover of the
object value).
Command on falling
edge
Switching object 1.1
No reaction
ON
OFF
TOGGLE
This parameter can be used to define
which object value is transmitted first to
the bus via the first communication
object of the input when there is a falling
edge (TOGGLE - switchover of the
object value).
Command on rising
edge
Switching object 1.2
No reaction
ON
OFF
TOGGLE
This parameter can be used to define
which object value is transmitted first to
the bus via the second communication
object of the input when there is a rising
edge (TOGGLE - switchover of the
object value).
Command on falling
edge
Switching object 1.2
No reaction
ON
OFF
TOGGLE
This parameter can be used to define
which object value is transmitted first to
the bus via the second communication
object of the input when there is a falling
edge (TOGGLE - switchover of the
object value).
Behaviour after bus
voltage
return
After a device reset (bus voltage return
or ETS programming operation), the
communication objects of the input can
be initialised. If, in the ETS, a delay is
set for the extension inputs after bus
voltage return, the device only transmits
the telegrams when the delay has
elapsed.
No reaction
After a device reset, no reaction takes
place automatically (no telegram is
transmitted to the bus).
Send ON telegram
In this configuration, an "ON" telegram is
actively transmitted to the bus after a
device reset.
Send OFF telegram
In this configuration, an "OFF" telegram
is actively transmitted to the bus after a
device reset.
Transmit current input
status
In this setting, the device evaluates the
static signal status of the input and,
according to this, transmits the
appropriately configured telegram to the
bus (contact closed at the input =
telegram as with rising edge; contact
open at input = telegram as with falling
edge). If, in this case, the edge
command dependent on the current
Page 127 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
