Art. No. DS 4092 TS
Value transmitter
(0...65535)
(0 lux to 1500 lux) or as integers
(0 to 65535). The following parameters
and their settings depend on this
selection.
Temperature value
(0...40 °C)
0...
20
...40
This parameter defines the object value
when the button is pressed.
This is only visible if "Function =
Temperature value transmitter"!
Brightness value
0, 50...
300
...1450,
1500 lux
This parameter defines the object value
when the button is pressed.
This is only visible if "Function =
Brightness value transmitter"!
Value (0...65535)
0
...65535
This parameter defines the object value
when the button is pressed.
This is only visible if "Function = Value
transmitter (0...65535)"!
Value adjustment by
long button-press
disabled
enabled
If value adjustment by long button-press
is enabled, the ETS shows further
parameters.
Value adjustment begins, when the
button is held down for more than 5 s.
Starting value in case of
value adjustment
Value adjustment can begin with
different starting values.
same as configured value
After each long press, the device always
starts with the value configured in the
ETS.
same as value after last
adjustment
After a long press, the device starts with
the value transmitted by itself as the last
value.
same as value from
communication object
After a long press, the device starts with
the value transmitted by itself or by
another device with this group address
as the last value. This setting selectable
only if "Function = Value transmitter
(0...65535)"!
This parameter is only visible if "Value
adjustment by long button-press =
enabled"!
Direction of value
adjustment
upwards
downwards
toggling (alternating)
With a long press, the device can either
vary the values always in the same
direction or it stores the direction of the
last adjustment and reverses it on the
next button-press.
This parameter is only visible if "Value
adjustment by long button-press =
Page 103 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
