8 Startup and parameterization
36
8.5
Process level details
This level is active when the device is switched on.
12.6 L/S
or
0 L/S.
A dot after the flow unit indicates that the CUT-OFF
function is active.
The displayed flow rate is set to 0 because the mea-
sured flow rate is below the threshold value defined
in the CUT-OFF parameter of the parameters
menu,
see chapter 8.6.16 "Adjusting the CUT-
Flow rate value, selecting and adjusting the unit,
see
chapter 8.6.2 "Choosing the flow rate unit, the number of decimals, and the
counter display unit", page 38.
16.45 mA
Value of the current output, proportional to the measured flow rate
87654 L
Value of the main counter, volume of fluid counted by the device since the
last reset.
231 L.
Value of the daily counter (identified by a dot after the volume units), volume
of fluid counted by the device since the last reset.
Resetting the daily counter
> 2 s
+
