Chapter 4 _________________________________________________________________ Operation
JUMO __________________________________________________________________________ 95
Date and Time
Using Display/Keypad
If the optional Data Logger Module is installed, you can change the
time and date using the display/keypad.
1.
Press any of the arrow buttons to open the MAIN MENU.
2.
Select
System
and press the ►arrow button to confirm your
selection.
3.
Select
Date and time
and press the ►arrow button.
4.
Press the
SET
button to enter the adjustment mode, and use the
arrow buttons to select and change the values.
5.
You can also change the date and time formats that are shown in
the graphs. The selected formats are only used in graphical
display, they do not change the formats that are used in the serial
communication.
6.
Press
EXIT
to return to the basic display.
Using Serial Line
To set time enter the
TIME
command. To set date enter the
DATE
command.
TIME
DATE
These time and date settings are shown on the timestamps of
PLAY
command. When you want to include time and date in the
R
and
SEND
commands, use the
FTIME
and
FDATE
commands.
Example:
>TIME
Time : 13:42:49 ?
>DATE
Date : 2007-05-31 ?
NOTE
If the optional Data Logger Module is not installed, time and date are
cleared to 2000-01-01 00:00:00 at reset or at power failure.
