User's Guide _______________________________________________________________________
64 _______________________________________________________________________________
The time that is shown below the graph is adjusted with the current
time offset of the transmitter. If you change the transmitter's date and
time setting, the displayed timestamps in the history graph change
accordingly. For an explanation of the effect of changing the date and
time manually, see section Data Logger Module on page 57.
Table 10
Graph Information Messages in Cursor Mode
Message
Interpretation
Power outage
Power failure (marked also with dashed
vertical line)
No data
Quantity has not been selected for the display
Device failure
General device failure
T meas. failure
Temperature measurement/sensor failure
RH meas. failure
Humidity measurement/sensor failure
Adj. mode active
Adjustment mode active (data recorded in the
adjustment mode is not displayed)
A question mark after time tells you that at least one power failure
(dashed vertical line) has occurred after the chosen moment. In this
case, the exact time difference between the present and the cursor
position is not exactly known.
Menus and Navigation
You can change settings and select functions in the menus.
1.
Open the
MAIN MENU
by pressing any of the ▼▲◄► arrow
buttons in the basic (numeric) display mode.
2.
Move in the menus by using the ▲▼ arrow buttons.
3.
Open a submenu with ► button.
4.
Press ◄
to return to the previous level.
5.
Function button
EXIT
returns you back to the basic display.
