Chapter 4 _________________________________________________________________ Operation
JUMO _________________________________________________________________________ 123
SEND
Use the SEND command to output the reading once in POLL mode:
SEND [
aa
]
where
aa =
address of the transmitter
OPEN
When all transmitters on the RS-485 bus are in POLL mode the
OPEN
command sets one transmitter temporarily to STOP mode so
that other commands can be entered.
OPEN [
aa
]
where
aa =
address of the transmitter (0 ... 99)
CLOSE
The
CLOSE
command switches the transmitter back to the POLL
mode.
Example:
>OPEN 2 (opens the line to transmitter 2, other
transmitters stay in POLL mode)
>CRH
(for example, calibration performed)
...
>CLOSE (line closed)
