User's Guide _______________________________________________________________________
88 _______________________________________________________________________________
- Outputting interval can be changed with the
INTV
command.
- Output message format can be changed with the
FORM
command
.
- Status of chemical purge and probe heating can be added with the
FST
command.
- Date and time information can be added with commands
FDATE
and
FTIME
Stopping Continuous Outputting
S
Use the
S
command to end the RUN mode. After this command all
other commands can be used. You can also press the Esc button or
reset the transmitter to stop the outputting.
See command
SMODE
to change the default (power-up) operation
mode.
Outputting Reading Once
SEND
Use the SEND command to output the reading once in STOP mode.
The output format depends on which parameters the transmitter can
output.
Examples:
RH= 98.4 %RH T= 31.1 'C
RH= 98.4 %RH T= 31.1 'C Td= 36.0 'C Tdf= 36.0 'C a= 42.4
g/m3 x= 38.8 g/kg Tw= 30.8 'C ppm= 62414 pw= 59.53
hPa pws= 60.52 hPa h= 130.7 kJ/kg
Outputting Reading with Raw Data
SEND D
Example:
>send d
24.1720 15.0399 -3.5743 189.2324 15.0709 15.0399
23.9765
