Chapter 4 _________________________________________________________________ Operation
JUMO __________________________________________________________________________ 69
0802-069
Figure 44
Display Alarms
3.
Use the arrow keys to select an alarm to configure. The alarm
editing page opens.
NOTE
Changes you do on the alarm editing page will take effect
immediately, and may cause an alarm to appear on the screen.
4.
To select a quantity for the alarm, press the
Change
button and
select the quantity from the list.
5.
To modify or remove the alarm limit values, move the selection
over the
Act. above
or
Act. below
field and press the
Set
button. You will be prompted to
Modify
or
Remove
the value.
0802-070
Figure 45
Modifying an Alarm Limit
When modifying the value, use the arrow up and down buttons
to change the value under the cursor. Left and right arrow
buttons move the cursor. Select the OK button to accept the
modified value, or Cancel to undo the modification.
6.
Set a suitable
Hysteresis
value to prevent the alarm from being
triggered unnecessarily by small measurement changes that pass
the alarm limit repeatedly.
7.
Set or clear the
Alarm enable
checkbox to enable or disable the
alarm.
8.
Press the
Exit
button to leave the alarm configuration screen and
return to the basic view.
