User's Guide _______________________________________________________________________
12 ____________________________________________________________________________
Product Related Safety Precautions
The JUMO Humidity and Temperature Transmitter Series 907023
delivered to you has been tested for safety and approved as shipped
from the factory. Note the following precautions:
WARNING
Ground the product, and verify outdoor installation grounding
periodically to minimize shock hazard.
CAUTION
Do not modify the unit. Improper modification can damage the
product, lead to malfunction, or make the product noncompliant with
applicable legislation.
ESD Protection
Electrostatic Discharge (ESD) can cause immediate or latent damage
to electronic circuits. JUMO products are adequately protected against
ESD for their intended use. However, it is possible to damage the
product by delivering electrostatic discharges when touching,
removing, or inserting any objects inside the equipment housing.
To make sure you are not delivering high static voltages yourself:
- Handle ESD sensitive components on a properly grounded and
protected ESD workbench. When this is not possible, ground
yourself to the equipment chassis before touching the boards.
Ground yourself with a wrist strap and a resistive connection cord.
When neither of the above is possible, touch a conductive part of
the equipment chassis with your other hand before touching the
boards.
- Always hold the boards by the edges and avoid touching the
component contacts.
Regulatory Compliances
Transmitters with LAN or WLAN Interface
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
