Judo JUV 10 G, Инструкция по установке и эксплуатации

Страница: 44 / 64

Installation and operating instructions: JUDO UV disinfection system JUV 10-110 G/GS
All rights reserved. JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380

D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0

Fax +49 (0)7195-692-188
Revision level: 03.05.2017
E-mail: info@judo.eu

Internet: www.judo.eu
44
B u z z e r
M o d e O N
Selecting the desired display will apply the setting.

Display switches to status display 6: Stop IN
6
S t o p I N
0 0 h
Stop IN
→ Deactivation time for switching interval
See below for an example of interval switching*:
Function disabled: 00 h
or
Do not change setting:

Display switches to status display 5: Buzzer

Display switches to status display 7: Stop For
or Change setting:

Press Enter to call up the cursor.
S t o p I N
0 0 h

Press Enter to position the cursor and increase or decrease the
numerical value in hours by pressing the up and down keys.

Press Enter until you reach the end of the row and the cursor
disappears. Input is set.

Display switches to status display 7: Stop For
7
S t o p F o r
0 0 h
Stop For
→ Activation time for interval switching
See end of chapter for an example of interval switching*.
Setting 00 h = Function disabled.
or
Do not change setting:

Display switches to status display 6: Stop IN

Display switches to status display 8: Calibr.T
or Change setting:

Press Enter to call up the cursor.
S t o p F o r
0 0 h

Press Enter to position the cursor and increase or decrease the
numerical value in hours by pressing the up and down keys.

Press Enter until you reach the end of the row and the cursor
disappears. Input is set.

Display switches to status display 8: Calibr.T