Installation and operating instructions: JUDO UV disinfection system JUV 10-110 G/GS
All rights reserved.
JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380
D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0
Fax +49 (0)7195-692-188
Revision level: 03.05.2017
E-mail: [email protected]
Internet: www.judo.eu
42
6.2.4
Settings menu
Use the key to select the setting and confirm by pressing Enter
. Once inside the menu you can enable
functions (e.g. ON/OFF or NC/NO) with the Enter
key. For settings requiring the input of numerical values
(e.g. delay times, interval function), use the Enter key
to activate certain values or to navigate between
them. Use the and keys to increase or decrease the numerical values.
If you do not call up a setting or confirm a function or numerical value of the
corresponding setting within 3 seconds, the display will return to the status display.
1
S e t t i n g s
M E N U
Settings MENU
In the Settings menu you can adjust settings and modify parameters.
Press Enter to access the Settings menu.
2
O N
D e l a y
0 0 0 5 s
ON Delay
→
Switch-on delay
The switch-on delays allows the UVC lamp to heat up (and delay
alarms).
or
Do not change setting:
Display switches to status display
9: Exit Settings
Display switches to status display
3: Remote N/C
or
Change setting:
Press Enter to call up the cursor.
O N
D e l a y
0 0 0 5 s
Press Enter to position the cursor and enter the numerical value in
seconds by pressing the arrow keys.
Press Enter until you reach the end of the row and the cursor
disappears. Input is set.
Display switches to status display
3: Remote N/C
3
R e m o t e
N / C
Remote N/C, Remote N/O
→
Remote stop via Remote input
N/C = Stop if input closed (default setting)
N/O = Stop if input open
or
Do not change setting:
Display switches to status display
2: On Delay
Display switches to status display
4: OFFDelay
