Judo JUV 10 G, Инструкция по установке и эксплуатации

Страница: 43 / 64

Installation and operating instructions: JUDO UV disinfection system JUV 10-110 G/GS
All rights reserved. JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380

D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0

Fax +49 (0)7195-692-188
Revision level: 03.05.2017
E-mail: info@judo.eu

Internet: www.judo.eu
43
or Change setting:

Press Enter to switch between Remote NC and Remote NO.
R e m o t e
N / O
Selecting the desired display will apply the setting.

Display switches to status display 4: OFFDelay
4
O F F D e l a y
0 0 6 0 s
OFFDelay
→ Delay time for remote stop
Delay time for remote stop via Remote input.
or
Do not change setting:

Display switches to status display 3: Remote N/C or Remote N/O

Display switches to status display 5: Buzzer
or Change setting:

Press Enter to call up the cursor.
O F F D e l a y
0 0 6 0 s

Press Enter to position the cursor and enter the numerical value in
seconds by pressing the arrow keys.

Press Enter until you reach the end of the row and the cursor
disappears. Input is set.

Display switches to status display 5: Buzzer
5
B u z z e r
M o d e O F F
Buzzer Mode OFF
If an acoustic alarm is used, e.g. a buzzer, you can set the ON/OFF
function. Pulse function in case of fault (per 5 seconds ON/OFF) for
output 230 VAC.
Attention: Disable if a service valve is connected to this output!
or
Do not change setting:

Display switches to status display 4: OFFDelay

Display switches to status display 6: Stop IN
or Change setting:

Press Enter to switch between Buzzer Mode OFF and Buzzer
Mode ON .