Judo JUV 10 G, Инструкция по установке и эксплуатации

Страница: 40 / 64

Installation and operating instructions: JUDO UV disinfection system JUV 10-110 G/GS
All rights reserved. JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380

D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0

Fax +49 (0)7195-692-188
Revision level: 03.05.2017
E-mail: info@judo.eu

Internet: www.judo.eu
40
6.2.3 Info menu
When in the Information menu, the display does not automatically return to the status
display after 3 seconds. The individual displays remain active and can be displayed as
permanent information instead of the status display.
After a restart of the
control unit, the “Hr. Lamp” status display with the theoretically
remaining life of the UVC lamp is displayed.
1
I n f o
M E N U
Info MENU
→
Information menu
The Information menu shows operation information.

Press Enter to access the Information menu.
2
H r . T o t
0 0 0 0 4
Hr. Tot
→
Total operating hours
Displays the total operating hours.
or

Display switches to status display 9: Exit Info

Display switches to status display 3: UVC
3
U V C
1 0 0 %
UVC
→
UVC intensity
Displays the UVC radiation strength in %.
or

Display switches to status display 2: Hr. Tot

Display switches to status display 4: UVSensor
4
U V S e n s o r
1 5 9 0 m V
UVSensor
→ UV sensor signal (JUV 10-110 GS only)
Displays the measured voltage of the UV sensor in mV based on the
radiation strength.
or

Display switches to status display 3: UVC

Display switches to status display 5: Temp
5
T e m p
2 0 ° C
Temp
→ Temperature (JUV 10-110 GS only)
Displays the measured temperature.

Display switches to status display 4: UVSensor