Installation and operating instructions: JUDO UV disinfection system JUV 10-110 G/GS
All rights reserved.
JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380
D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0
Fax +49 (0)7195-692-188
Revision level: 03.05.2017
E-mail: [email protected]
Internet: www.judo.eu
36
6.2
Operating the control unit / adjusting settings
6.2.1
Switching on the UV disinfection system
0
Display off: control unit not connected to the electrical outlet
Connect the control unit to the electrical outlet
Display starts from
2:
LCD Univ
1
S y s t e m
O f f
System Off
→
UVC lamp off
System has been manually switched off.
Press the Enter key for 1 second to activate the control unit.
Once switched on, the display will start from
3: Start Up
or
R e m o t e
O f f
Remote Off
System switched off remotely
Disable Remote stop.
Once switched on, the display will start from
3: Start Up
2
L C D
U n i v
M g 6
V 3 . 0
LCD Univ
→
Software version
This software version is shown once the control unit is connected to the
electrical outlet.
After 5 seconds the display switches to status display
3: Start Up
3
S t a r t
U p
. . 0 0 0 5
s
Start Up
→
Start switch-on delay
Once switched on via the Enter key, the switch-on delay in seconds is
displayed.
Switch-on delay counts down to zero.
The delay time can be adjusted (see Chap. 6.2.4).
At the end of the countdown the display will switch to status
display
4: Start N°.
4
S t a r t
N °
0 0 0 0 5
Start N°
→
Number of circuit closings
Displays the total of circuit closings.
After 3 seconds the display switches to status display
5: UVC lamp life.
5
H r .
L a m p
0 9 0 0 0
Hr. Lamp
→
UVC lamp life (status display)
The
Hr. Lamp
display is the status display and is displayed
permanently.
Displays the remaining life of the UVC lamp in hours and counts down
from 9,000 hours to zero. Once the life has expired,
Change Lamps
is
displayed and the UVC lamp must be replaced (see Chap. 10.1).
