Installation and operating instructions: JUDO UV disinfection system JUV 10-110 G/GS
All rights reserved.
JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380
D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0
Fax +49 (0)7195-692-188
Revision level: 03.05.2017
E-mail: [email protected]
Internet: www.judo.eu
27
5.2.3
Quartz tube, UVC lamp, possibly UV sensor (with JUV 10-110 GS)
Attention
Protect the quartz tube, UVC lamp and UV sensor from being damaged or scratched and
wipe them clean with a soft cloth before installation (fingerprints or other greasy
residues may result in permanent marks).
Install the quartz tube, UVC lamp and UV sensor (if any) according to the installation steps shown below:
Exemplary installation steps for a one and two-lamp system.
Fig. 12: Screw cap Fig. 13: Quartz tube
Fig. 14: Spring-loaded guide Fig. 15: O-ring
Fig. 16: UV sensor (JUV 10-110 GS)
Fig. 17: Spacer
Fig. 18: UVC lamp
Fig. 19: Connection plug Fig. 20: Protective cover
Fig. 21: Protective conductor
1
2
3
4
5
6
7
8
9
10
