JR 10X HELICOPTER VERSION Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 76

background image

Model Name Input

This function is used to name each model in the memory of your
transmitter, making it very convenient to change from one air-
plane to another. You may also want to list the frequency of each
airplane should you use more than one frequency between mod-
els. This helps prevent frustration at the flying field.

Accessing and Utilizing the Model Name Function

To access the Model Name function, enter Code 81 in the code
number access selection or use the direct mode method.

Your screen will appear as follows:

Note: There is space in the model name for 16 letters or num-

bers from the alpha numeric selections.

The vertical arrow serves as the cursor and indicates the posi-
tion of the next letter or number to be entered. To create a space
between numbers and/or letters, simply touch the horizontal
arrow

→

or touch the SEL key until you see the blank space and

touch this key.

To enter a number or letter, use the SEL key until the desired
number/letter appears, then press the number/letter. It will appear
in the indicated position.

Note: The cursor automatically moves to the next entry posi-

tion. To correct a character that is entered in error, press the hor-
izontal arrow until the cursor is under the character to be cor-
rected and select a replacement character.

Touch the next letter or number until the model naming process is
complete.

Touch ENTER to memorize the model name and to exit this pro-
gram.

Note: The model name (and frequency, if entered) appears on the

initial screen each time the 10X is turned on.

Note: If Code 28, Data Reset, has been used, the model name

is also reset.

10X MANUAL Airplane

59

8.22

Code 81

Indicates code which
is being programmed

Model number
to be named

Touch
to exit program

Cursor indicates location
of next alpha/numeric
character

Touch any letter/number to enter at cursor. Touch for next selection
(

NOTE:

There is space in the model name for sixteen characters)

Touch to move cursor (cursor
can only be moved to the right)

Touch to access
next screen of
alpha/numeric selection

«
...
57
58
59
60
61
...
»

Содержание 10X HELICOPTER VERSION













































































Отзывы:

Нет отзывов

Похожие инструкции для 10X HELICOPTER VERSION

Бренд: wattio Страницы: 20

Бренд: Salda Страницы: 20

Бренд: jbc Страницы: 44

Бренд: jbc Страницы: 8

Бренд: LAS Страницы: 6

Бренд: Samson Страницы: 8

Бренд: Samson Страницы: 60

Бренд: Samson Страницы: 40

PowerFlex 755 IP00

Бренд: Allen-Bradley Страницы: 78

Бренд: Sabiana Страницы: 60

Бренд: TWR Lighting Страницы: 49

Бренд: Cypress Страницы: 3

IB-TRON 4000 SOL

Бренд: INSBUD Страницы: 14

Бренд: Sherlotronics Страницы: 2

Бренд: EFI Страницы: 127

Бренд: maxxess Страницы: 11

Бренд: SOLARJACK Страницы: 14

Бренд: Swagelok Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды