JR 10X HELICOPTER VERSION, Руководство пользователя

Страница: 42 / 76

Standard Programmable Mixing
The 10X provides five standard programmable mixes.
Programmable mixes are used whenever the pilot wants a chan-
nel/servo to react or move as a result of providing input to anoth-
er channel. The channel that reacts is called the Slave channel,
while the channel that receives direct input is called the Master
channel. Under this concept, when the pilot provides an input to
the Master channel, the transmitter automatically generates an
input for the Slave channel/servo so that it moves in a specified
direction for a specified amount.
Mixes are programmable, allowing any of the 10 channels to be
Master, Slave or both. The offset (mix neutral point), direction
and travel can all be programmed and adjusted.
Accessing and Utilizing the Standard
Programmable Mixing Function
To access the Programmable Mixing function, enter the proper
code, 51-55, in the code number access selection or use the direct
mode method. The screen will appear as follows:
Each channel of your transmitter and receiver has been assigned a
number for identification purposes. Use the following chart to
identify the channel and its identification number.
The first number key you select becomes the Master channel. It
also activates the mix feature. The Master channel is the channel
from which you want to mix. In other words, this is the control-
ling channel for the mixing feature.
The second number key selected becomes the Slave channel. The
Slave channel is the channel that is being mixed into the Master
channel. You can also think of it as the controlled channel for the
mixing feature.
For example, you want to mix the aileron channel to the throttle
channel. Aileron is the Master, or controlling, channel. Throttle is
the Slave, or controlled, channel. The initial screen shows that the
mixing feature is inhibited. However, after aileron is selected the
screen will appear as follows:
Next, choose the Slave channel—in our example, throttle. The
screen will now change to display:
Note: Once both the Master and Slave channels have been
selected, the channel numbers are removed from the bottom of the
screen. If you have mistakenly entered a wrong channel number
for either the Master or the Slave channels, touch the CANCEL
key and reprogram the mixing channels.
42
10X MANUAL Airplane
8.13 Code 51-55
Indicates program
being accessed Indicates that MIX 1
is currently inhibited Touch to cancel
current mix if activated
Touch to select master
and slave channels
Touch to
exit program
Channel # Receiver Channel Complete Channel Name
1 THRO Throttle
2 AILE Aileron
3 ELEV Elevator
4 RUDD Rudder
5 GEAR Gear/Retract
6 AUX1 Auxiliary 1 (flaps)
7 AUX2 Auxiliary 2
8 AUX3 Auxiliary 3
9 AUX4 Auxiliary 4
10 AUX5 Auxiliary 5
Touch to
exit program
Indicates that MIX 1
is active and that the
master channel is
aileron
Indicates feature
being accessed
Slave channel
when selected
Indicates mix to
channel
Master channel
Touch to select master
and slave channels
Touch to cancel
current mix and return to
mix inhibited screen
Touch
to proceed to
next screen
Indicates
feature being
accessed Indicates
that MIX 1
is active
Master
channel
Touch to
cancel current mix
and return to mix
inhibited screen
To Slave
channel