JR ProPo xg8 Скачать руководство пользователя страница 64

Страница: 64 / 92

TRAINER

Each Function in the System List

Function Explanation

This function allows guidance of the Slave stick operation on an identical XG8 transmitter or

another transmitter manufactured by JR that is connected using the trainer cable. The opera-

tion switching is carried out using the trainer switches of the Master transmitter.

•

Setting Method

•

【TRAINER】

●Slave Side Screen

Before flying, be certain to match the same positions to ensure there is no displacement of

the servos for each Stick Trim in the Master and Slave transmitters. Further, also confirm

the directions and control surface angles.

Caution Item

The settings should be carried out using the Master transmitter. Then determine using the

Master transmitter which of the sticks are to be practiced on the slave transmitter. The Stick

channels of the switch positions on the screen that have been moved to the “SLAVE” side can

be operated using the Slave transmitter.

(However, this will only be the case for slave transmitters that incorporate the Programmable

Function Trainer function.)

In the situation where the Slave transmitter does not incorporate the Programmable Func-

tion Trainer function, in principle the training can not be carried out unless the aircraft can

be flown (the flight can be set) using the Slave transmitter. However, when the Slave trans-

mitter supports the Programmable Function Trainer function, training will be possible for

any aircraft provided it can be flown using the Master transmitter.

•

Hint

•

Screen during Normal Connection

Screen when there are Connection Problems

The cable is not connected or the power is switched on.

Helicopter

Airplane

Glider

●Master Side Screen

This sets the Master.

The checked Stick Channels will

be operated using the Slave

transmitter.

Trainer Mode Display

Connect the trainer cable when the power of the Slave transmitter (trainee) is in the OFF

condition. In the situation where the Slave transmitter has an LCD screen, the Trainer

Function screen will show “SLAVE”. Further, carefully conﬁrm the connection.

Содержание xg8





























































































Результаты поиска

Содержание xg8

Отзывы:

Бренды по названию

Популярные бренды

JR ProPo xg8, Руководство по эксплуатации

Результаты поиска

Содержание xg8

Отзывы:

Бренды по названию

Популярные бренды