JR ProPo xg8 Скачать руководство пользователя страница 58

Страница: 58 / 92

●

Screen for Airplanes

●

Screen for Gliders

TRIM SYSTEM

Function Explanation

In this screen, the various settings relating to Trim can be changed. The resolution of each Trim, the Trim type, the

position replacement settings and whether separate use or common use is to be used in the Flight Mode can be set.

Using this function, customers can freely change the settings of the easy-to-use Trim.

•

Setting Method

In Page 1, the Trim steps and Trim type for each channel can also be set. Rotate the dial to select the items, and push

the dial to change the items. In Page 2, it is possible to set whether the Trim between Flight Modes is to be used

separately or commonly, and to set Cross Trim (replacement) which makes it easy to carry out adjustment during

flight. (Except for gliders)

•

【TRIM SYS】

●

Screen for Helicopters

Each Function in the System List

The channel names will change slightly according to the model type.

L.S.T. is an abbreviation of Limit Stroke Trim. It diﬀers from Normal Trim, which carries out

movement over the complete servo movement range, since it is a Trim system that

moves the trim greatly in the central part without moving the Trim at each end.

For this reason, because the maximum control surface angle used for the Trim adjust-

ment will not change, there need be no concern that the linkages will lock.

In the case of helicopters, when “NORM” has been selected in the Throttle Trim the com-

plete Throttle Curve can be moved up and down. This will be highly convenient in situa-

tions such as when using Gas mode in the motor ampliﬁer setting of electrically powered

helicopters.

•

Hints

Helicopter

Airplane

Glider

Channel Name

Same as in the Helicopter Screen

Trim Type

NORM: Normal Trim

IDLE: Slow Side Trim

L.S.T: Limit Stroke Trim

Type of Trim

Trim Step Amount

Trim Position Replacement

This switches ON/OFF

the Flap Trim

If INH is released, Trim

replacement using the switches

will become possible.

Trim between

Flight Modes
COM: Common

FMOD: Separate

Trim between

Flight Modes
COM: Common

FMOD: Separate

Same as in the Helicopter Screen

Flaperon Trim Movement Direction

Trim between

Flight Modes
COM: Common

FMOD: Separate

Содержание xg8





























































































Результаты поиска

Содержание xg8

Отзывы:

Бренды по названию

Популярные бренды

JR ProPo xg8, Руководство по эксплуатации

Результаты поиска

Содержание xg8

Отзывы:

Бренды по названию

Популярные бренды