manualshive.com logo in svg

Johnson Controls HS3032, Справочное руководство

Познакомьтесь с продуктом Johnson Controls HS3032 и загрузите бесплатное Руководство по эксплуатации на нашем сайте. Получите доступ к подробной информации и инструкциям по использованию этого продукта. Посетите наш сайт, чтобы скачать его совершенно бесплатно.

Поделиться
Скачать
background image

Appendix 5: Regulatory approvals

Appendix 5: Regulatory approvals

5.1 FCC COMPLIANCE STATEMENT

CAUTION:

Changes or modifications not expressly approved by Digital Security Controls could void your authority to use

this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

l

Re-orient the receiving antenna.

l

Increase the separation between the equipment and receiver.

l

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

l

Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify and Resolve Radio/Television Interference Problems". This
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC Rules, and, if the product was approved July 23, 2001 or later, the requirements adopted by the
ACTA. On the side of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this number must be provided to the Telephone Company.

HS3032 Product Identifier US:F53AL01AHS3256

HS3128 Product Identifier US:F53AL01AHS3256

HS3248 Product Identifier US:F53AL01AHS3256

USOC Jack: RJ-31X

Telephone Connection Requirements

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation instructions for details.

Ringer Equivalence Number (REN)

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in
the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact the local Telephone Company. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the format.

US: AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN
is separately shown on the label.

Incidence of Harm

If this equipment HS3032/HS3128/HS3248 causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice is not practical, the Telephone Company will notify the customer as
soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

Changes in Telephone Company Equipment or Facilities

The Telephone Company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment.
If this happens the Telephone Company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted
service.

Equipment Maintenance Facility

If trouble is experienced with this equipment HS3032/HS3128/HS3248 for repair or warranty information, please contact the facility indicated
below. If the equipment is causing harm to the telephone network, the Telephone Company may request that you disconnect the equipment until
the problem is solved. This equipment is of a type that is not intended to be repaired by the end user.

Tyco Atlanta Distribution Center
2600 West Pointe Dr.
Lithia Springs, GA 30122

Additional Information

- 265 -

Содержание HS3032







































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HS3032

Badger Basket 9924 User Manual preview
9924
Бренд: Badger Basket Страницы: 3
ZIMO MX10 Instruction Manual preview
MX10
Бренд: ZIMO Страницы: 38
OES ISC-9000 Operational Instructions preview
ISC-9000
Бренд: OES Страницы: 3
Watts FEBCO 860 Small Series Installation Maintenance Repair Manual preview
FEBCO 860 Small Series
Бренд: Watts Страницы: 12
Bardiani Valvole BBZS5 Instruction, Use And Maintenance Manual preview
BBZS5
Бренд: Bardiani Valvole Страницы: 54
Parker 890CS Product Manual preview
890CS
Бренд: Parker Страницы: 478
Valco baby ZEE Product Reference Manual preview
ZEE
Бренд: Valco baby Страницы: 8
SAGEMCOM DIW377 ALT US Manual preview
DIW377 ALT US
Бренд: SAGEMCOM Страницы: 2
Instant Care IC2020TX Manual preview
IC2020TX
Бренд: Instant Care Страницы: 2
Rollei Soluna Remote Control Instruction Manual preview
Soluna Remote Control
Бренд: Rollei Страницы: 8
TSM DOUBLER2 Instructions For Installing preview
DOUBLER2
Бренд: TSM Страницы: 2
Water Specialist WS1TT Drawings And Service Manual preview
WS1TT
Бренд: Water Specialist Страницы: 36
J+J J4C 20 Assembly Instructions Manual preview
J4C 20
Бренд: J+J Страницы: 6
Raypak RAYTHERM 624 Specifications preview
RAYTHERM 624
Бренд: Raypak Страницы: 2
4D systems gen4-uLCD-32D Quick Start Manual preview
gen4-uLCD-32D
Бренд: 4D systems Страницы: 6
Phoenic Mecano Okin Q28-BNC Quick Start Manual preview
Okin Q28-BNC
Бренд: Phoenic Mecano Страницы: 5
Watts AMES 910GD-11 Installation, Operation And Maintenance Manual preview
AMES 910GD-11
Бренд: Watts Страницы: 12
tau D755M Installation Manual preview
D755M
Бренд: tau Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды