manualshive.com logo in svg

Johnson Controls HS3032, Справочное руководство

Познакомьтесь с продуктом Johnson Controls HS3032 и загрузите бесплатное Руководство по эксплуатации на нашем сайте. Получите доступ к подробной информации и инструкциям по использованию этого продукта. Посетите наш сайт, чтобы скачать его совершенно бесплатно.

Поделиться
Скачать
background image

Section 5: Programming

3 – Pulse Dialing

ON: The alarm system dials telephone numbers using pulse (rotary) dialing.

OFF: The alarm system dials telephone numbers using DTMF (dual tone multi-frequency) touch-tone dialing.

4 – Pulse Dial after 5th Attempt

ON: If DTMF dialing is enabled, the alarm system dials telephone numbers using DTMF dialing for the first 4 attempts. If
unsuccessful, the alarm system switches to pulse (rotary) dialing for the remaining attempts.

OFF: If DTMF dialing is enabled, the alarm system dials telephone numbers using DTMF dialing for all dialing attempts.

5 – Parallel Communications

ON: Parallel communications is enabled. The alarm system attempts to communicate through all available receiver paths
(PSTN and IP (IP=Ethernet or Cellular) at the same time. Once acknowledgment is provided by any of the receivers, the
alarm system communicates the next event. If more than one receiver is configured for PSTN, the backup procedure
described below is followed.

OFF: Parallel communications is disabled. If receiver 1 fails, the alarm system attempts to communicate with the next avail-
able receiver (2-4) in sequence.

Note:

When Parallel Communications is enabled it will override Communicator Backup Options, see "[384] Communicator

Backup Options" on page 128 for communicator backup programming.

6 – Alternate Dial

ON: After each failed dialing attempt, the communicator switches to the next backup receiver in the sequence:

l

Receiver 2 backs up Receiver 1

l

Receiver 3 backs up Receiver 2

l

Receiver 4 backs up Receiver 3

This continues until communication is successful or the sequence has been repeated 5 times (depending on the number of
maximum dialing attempts). If all 5 attempts fail, an FTC trouble for the primary phone number is logged. All backup receivers
automatically use the same call directions and format as the primary receiver.

OFF: After 5 failed attempts to communicate with the primary receiver, the communicator switches to the next backup
receiver in the sequence and makes up to 5 more attempts. This continues until communication is successful or until all
backup receivers fail, at which point an FTC trouble for the primary number is logged.

7 – Reduced Dialing Attempts

ON: If a TLM trouble is present, The alarm system immediately attempts to call the backup receiver. This option only applies
to PSTN. Backup communications must be enabled. See option 5, Parallel Communications.

A minimum of two receivers should be enabled for this feature to operate as intended. This feature should not be enabled
unless the panel is programmed to use backup communication paths.

OFF: If a TLM trouble is present, the number of dialing attempts programmed shall be attempted before moving on to the
backup receiver.

8 – Activity Delinquency

ON: Inactivity on a partition for a programmed duration (section [377] option 002, Delinquency Transmission Delay) transmits
a Delinquency code to the central station. This option is designed to help monitor the elderly or disabled. The counter is
reset if zone activity is detected or if the system is armed. The Delinquency Transmission Delay is in hours.

Note:

Delinquency code is not transmitted while Away armed. Activity on bypassed zones does not affect this timer.

OFF: The Delinquency reporting code is sent when the programmed number of days for delinquency (section [377]) expires
without the partition being Armed. Once the code is sent, the timer is not started again until the partition has been armed.
Each day programmed in the counter represents one day plus the time it takes for the partition to reach midnight. To disable
this feature, program 000 in section [377]>[002] option 5.

[381] Communicator Option 2

1 – Keypad Ringback

ON: When the Opening After Alarm reporting code is successfully transmitted to a programmed telephone number, the
keypad emits a series of 8 beeps to confirm to the occupant that the code was sent and received. Ringback occurs for each
successfully reported Opening After Alarm code.

OFF: When the Opening After Alarm reporting code is successfully transmitted to a programmed telephone number, the
keypad does not sound ringback.

- 126 -

Содержание HS3032







































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HS3032

Radarcan R-200 User Manual preview
R-200
Бренд: Radarcan Страницы: 40
Danfoss VLT MCD 200 Installation Manual preview
VLT MCD 200
Бренд: Danfoss Страницы: 32
Danfoss PVG 16 PVH/Covers Technical Information preview
PVG 16 PVH/Covers
Бренд: Danfoss Страницы: 112
Danfoss PVG 100 Service And Parts Manual preview
PVG 100
Бренд: Danfoss Страницы: 44
Danfoss PVG 16 PVH/Covers Service And Parts Manual preview
PVG 16 PVH/Covers
Бренд: Danfoss Страницы: 144
Danfoss VLT LCP 11 Installation Instructions preview
VLT LCP 11
Бренд: Danfoss Страницы: 2
Danfoss VLT FC Series Operating Instructions Manual preview
VLT FC Series
Бренд: Danfoss Страницы: 64
Danfoss EKC 102A Instructions Manual preview
EKC 102A
Бренд: Danfoss Страницы: 8
Danfoss VLT AutomationDrive FC 360 Programming Manual preview
VLT AutomationDrive FC 360
Бренд: Danfoss Страницы: 60
Danfoss DHP-A Installation Instruction preview
DHP-A
Бренд: Danfoss Страницы: 6
Danfoss AMV 110 NL AQT Datasheet preview
AMV 110 NL AQT
Бренд: Danfoss Страницы: 4
Danfoss VLT FC Series Installation Manual preview
VLT FC Series
Бренд: Danfoss Страницы: 8
Danfoss AK-CC 550A Troubleshooting Manuallines preview
AK-CC 550A
Бренд: Danfoss Страницы: 2
Danfoss ECL Comfort 110 Quick Manual preview
ECL Comfort 110
Бренд: Danfoss Страницы: 2
Danfoss 103E5 Installation & User'S Instructions preview
103E5
Бренд: Danfoss Страницы: 24
Eaton i-on Compact Quick Setup Manual preview
i-on Compact
Бренд: Eaton Страницы: 12
Nacon GC-200WL Instruction Booklet preview
GC-200WL
Бренд: Nacon Страницы: 24
NAD C 399 Addendum Sheet preview
C 399
Бренд: NAD Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды